Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the indirect tyre pressure monitoring system (TPMS) warning light on the Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part:

The Fiat 500 uses an indirect tyre pressure monitoring system. This system does not measure the actual pressure with sensors inside the wheels but detects the difference in rotation speed between the wheels. If a tyre loses pressure, its diameter decreases, causing it to rotate faster than the others. The warning light activates when the system detects this difference. To reset the light, inflate all tyres to the correct pressure, referring to the pressures indicated on the door sill. Then turn on the ignition, press and hold the "SET" button (tyre icon, located on the left side of the dashboard) for 3-5 seconds until you hear a beep (or see a confirmation message). Turn off the ignition and start the engine. Drive for a few minutes to complete the learning process.

Posted on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How does the tire monitoring system work on the Fiat 500 E?
How does the tire monitoring system work on the Fiat 500 E?
Fiat 500 (2020-2026 / 500 E, 332) In this video we can see how the Tire Pressure Monitoring System (TPMS) works on the Fiat 500E. It is a preventive safety feature that monitors tire …
How to reset the tire pressure sensor of a Fiat 500?
How to reset the tire pressure sensor of a Fiat 500?
Fiat 500 (2007-2024 / 312) To reset the tire pressure light on a Fiat 500, turn on the instrument panel without starting the engine. Use the buttons on the instrument panel to …
How to reset the TPMS light on the Fiat 500 X
How to reset the TPMS light on the Fiat 500 X
Fiat 500 (2014-2022 / 500 X) The tire pressure warning light activates when it is necessary to adjust the pressure; after updating the tire pressure, following the guidelines ind…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos