Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Window Regulator Fuses

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018

Is the windscreen wiper on your Fiat not working anymore? In this video, learn how to replace the damaged fuses. At the bottom left of the dashboard, locate the plastic glove compartment, open it, and carefully remove the upper piece until it detaches from the dashboard. Once removed, you will find the car fuses. Check each fuse one by one until you find the damaged one. Replace it with a new fuse and reassemble everything. After fitting the fuse, check the proper functioning of the window regulator.

Updated on 25 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Where Are the Fuses Located on a Fiat Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) The fuses on a Fiat Punto are located inside dedicated fuse boxes installed in the vehicle. In this category of cars, you can find three fuse boxes. …
How to Replace the Window Regulator Mechanism on a Fiat Punto?
How to Replace the Window Regulator Mechanism on a Fiat Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this tutorial, you will see how to replace the window regulator mechanism on a Fiat Punto. Before proceeding, you will need to remove the door pan…
How to Remove the Window Regulator Motor on a Fiat Grande Punto
How to Remove the Window Regulator Motor on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) How to remove the window regulator motor on a Fiat Grande Punto? Here’s how to proceed. Before starting the disassembly, disconnect the battery termi…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the inertia switch on the Fiat Grande Punto? Read answer
    • Punto 2005-2018 - How many km does the Fiat Punto run in reserve? Read answer

How to Reset the EDC Light on an Iveco Eurocargo

The engine light on an industrial vehicle like the Iveco Eurocargo must not be ignored. An engine fault on a heavy vehicle can cause serious damage to itself and others. After servicing, you can reset the EDC light, which is equivalent to an engine light, using the following method. Get into the vehicle, close the doors, and turn on the ignition: press the "call" button on the right side of the steering wheel once, then press the "down" button on the left side of the steering wheel twice. Now press the "menu" button on the right side of the steering wheel (below the phone button) and the "plus" button on the left side of the steering wheel. Now press "Ok" (still on the "call" button) and the light will turn off. Turn off the ignition and turn it back on to verify.

Watch the video!


by ScegliAuto

More videos