Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Window Regulator Mechanism on a Fiat Punto?

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial, you will see how to replace the window regulator mechanism on a Fiat Punto. Before proceeding, you will need to remove the door panel.

Once this is done, remove the inner cover using a utility knife and lift the glass just enough to position the hook in the indicated position. Next, disengage the hook and secure the glass in the highest position possible to avoid obstructing the work.

Finally, disconnect the power connector, unscrew the three indicated bolts, and extract the mechanism. To install the replacement, follow the reverse procedure.


Updated on 13 July 2026 by ScegliAuto


Related tutorials

Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the electric window mechanism on a Fiat Grande Punto, you need to remove the panel to access the underlying parts. To remove the panel, it…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In today's tutorial, you will learn how to dismantle the rear window regulator mechanism on the Fiat Grande Punto, as well as on the Punto Evo. First…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video tutorial, you will learn how to reset and repair the non-functioning window switches on the Fiat Grande Punto, due to intermittent oper…

    Frequently Asked Questions

    • Punto 2005-2018 - What does the words "ESP, Hill holder not available" mean on the Fiat Punto Evo? Read answer
    • Punto 1999-2011 - How do you remove the headrest of the Fiat Punto 1.2? Read answer
    • Punto 2005-2018 - Where is the inertia switch on the Fiat Punto? Read answer
    • Punto 2005-2018 - How do i remove the center console of my Fiat Punto? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos