Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Electric Window Mechanism on a Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Checks and maintenance

To replace the electric window mechanism on a Fiat Grande Punto, you need to remove the panel to access the underlying parts. To remove the panel, it will be necessary to loosen the screws that hold it in place and disconnect the connector of the window switch and the speaker. At this point, the screws that secure the mechanism to the door will be accessible and can be loosened. The mechanism can be extracted through the wide hole located on the left side of the door. At this point, you can insert the new mechanism and secure it with the corresponding bolts.

Updated on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In order to replace the window regulator of the Fiat Grande Punto, you need to loosen the screws that secure the door panel corresponding to its hous…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this guide, learn the steps to remove the front door panel and window regulator motor on the Fiat Grande Punto, as well as the Punto Evo. First, o…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace an electric window regulator in the front door of a Fiat Grande Punto, fully lower the window and disconnect the battery. Then remove the …

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - What problem does the Fiat Punto have with the "city mode"? Read answer
    • Punto 2005-2018 - How to bleed the Fiat Punto clutch pedal? Read answer
    • Punto 2005-2018 - What does the words "ESP, Hill holder not available" mean on the Fiat Punto Evo? Read answer
    • Punto 1999-2011 - How do you remove the headrest of the Fiat Punto 1.2? Read answer
    • Punto 2005-2018 - Where is the inertia switch on the Fiat Punto? Read answer
    • Punto 2005-2018 - How do i remove the center console of my Fiat Punto? Read answer
    • Punto 1999-2011 - How does the air conditioning of the Fiat Punto work? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos