Do it yourself
Frequently asked questions about cars and motorcycles

A Fiat Grande Punto with cold start issues.

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Checks and maintenance

In this video we can see the cold start problems of a Fiat Grande Punto: through the diagnostics carried out with an OBD11 reader connected to the EOBD socket, the error P0105 was found, which means a faulty MAP sensor. The MAP sensor (from the English Manifold Air Pressure) measures the air pressure sucked in by the engine intake manifold, converts it into an electrical signal and transmits it to the engine control unit (ECU) allowing to establish the correct fuel dosage. After replacing this component, the problem of cold start failures was solved.

Posted on 23 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's video, see how to remove the service battery from the third series Fiat Punto; this tutorial also applies to the Grande Punto and Punto Ev…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To correctly and safely replace the air filter of your Fiat Grande Punto, follow the instructions outlined below. Before proceeding, remember that th…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To correctly and safely replace the engine air filter on your Fiat Grande Punto, follow these steps. First, this operation should be carried out with…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - What problem does the Fiat Punto have with the "city mode"? Read answer
    • Punto 2005-2018 - How to bleed the Fiat Punto clutch pedal? Read answer
    • Punto 2005-2018 - What does the words "ESP, Hill holder not available" mean on the Fiat Punto Evo? Read answer
    • Punto 1999-2011 - How do you remove the headrest of the Fiat Punto 1.2? Read answer
    • Punto 2005-2018 - Where is the inertia switch on the Fiat Punto? Read answer
    • Punto 2005-2018 - How do i remove the center console of my Fiat Punto? Read answer
    • Punto 1999-2011 - How does the air conditioning of the Fiat Punto work? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos