Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Fiat Ducato?

Model: Fiat Ducato X290 - Years 2014-2026
Part: Service warning light

To reset the Service light that appears on the instrument panel of the Fiat Ducato, you need to connect a diagnostic tool to the OBD port of the vehicle: this will be located on the dashboard immediately below the steering column. Once the scanner is connected, you can select the vehicle model and corresponding version: then follow the instructions to ensure that the light disappears completely from the instrument panel. At this point, you can disconnect the scanner and verify that everything is functioning correctly.

Posted on 3 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Fiat Ducato?
How to Reset the Service Light on the Fiat Ducato?
Fiat Ducato (2014-2026 / X290) To reset the Service light on the Fiat Ducato, turn on the instrument cluster by turning the key in the ignition switch: once it is on, press the acc…
What is the way to reset the Service light in the Fiat Ducato 250?
What is the way to reset the Service light in the Fiat Ducato 250?
Fiat Ducato (2006-2014 / X250) Before discussing the cancellation of the Service light on the Fiat Ducato 250, let's take a look at what maintenance work is required, following the…
How do you reset the Service light on the Fiat Ducato?
How do you reset the Service light on the Fiat Ducato?
Fiat Ducato (2006-2014 / X250) It is possible to make the Service light that is shown on the instrument panel of the Fiat Ducato disappear completely by keeping the accelerator ped…

    Frequently Asked Questions

    • Ducato 2014-2026 - How to reset the service warning light on Fiat Ducato? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos