Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the spare wheel in the Fiat 500?

Model: Fiat 500 312 - Years 2007-2024
Part: Wheel

In this video, it is explained not only where the spare wheel is located, but also how to remove it, in case it is necessary to replace it due to a puncture, etc. The aforementioned wheel is located under the car floor, in the rear area, held in place by a central pin anchored from the inside. To be able to remove and use it, the appropriate key must be taken, present in the kit supplied and stored under the driver's seat, inserted in a specific point on the floor of the luggage compartment and turned counterclockwise, in order to lower it to the road surface. To conclude, the aforementioned anchorage is released and the assembly is carried out.

Posted on 7 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Wheel with the Spare on a Fiat 500
How to Replace the Wheel with the Spare on a Fiat 500
Fiat 500 (2007-2024 / 312) Today's instructions will show you how to remove and replace the wheel with the spare on a Fiat 500, in simple and quick steps. First, take the spare…
How to Replace the Spare Wheel on a Fiat 500L
How to Replace the Spare Wheel on a Fiat 500L
Fiat 500 (2012-2023 / 500 L) In this brief video, you will see the instructions for removing and replacing the punctured wheel with the spare wheel on a Fiat 500L. First, open th…
How to Change the Spare Wheel on a Fiat 500
How to Change the Spare Wheel on a Fiat 500
Fiat 500 (2007-2024 / 312) Let's see how to change the spare wheel on a Fiat 500. Open the boot and take the wheel removal kit, which includes: jack, jack handle, screwdriver, …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos