Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. 500
  6. : How to replace the gear knob of the Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2023
Part: Gear Shift Knob
Operation: How to replace the gear knob of the Fiat 500

To carry out this operation it will be necessary to obtain the appropriate tools to carry out the work correctly, in fact you will have to lift with a slotted screwdriver, or even the tip of a knife, the part where the positions of the gears are indicated, so in this way you can unscrew the bolt that was covered by the round panel. Now you can lift the knob and then, if necessary, also extract the leather protective cap, extracting the entire base of the gear lever, so now you just have to go through the steps described backwards for reassembly.


Posted on 3 October 2023 by ScegliAuto

    Frequently Asked Questions

    • 500 2012-2023 - How much does the Fiat 500 L gear lever knob cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos