Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Ford Vari
    4. : Side mirror

Ford Ford Various - Side mirror

Side Mirror Ford Ford Various ( / )

Ford Ford Various
How to replace the mirror motor of a Ford car
In this video we see how to change the motor that provides the opening and closing movement of the mirror of a Ford car. This motor is located in the body that …Read all…
Posted on 25 June 2025 by ScegliAuto
Ford Ford Various
How to Secure the Wing Mirrors on the Ford Fiesta Kinetic
The external wing mirrors of the Ford Fiesta Kinetic can loosen due to bumps taken during various journeys, causing a gradual loss of visibility, especially …Read all…
Posted on 8 August 2026 by ScegliAuto
Airbag (6) Car stereo (14) Battery (3) Transmission (8) Body (4) Control unit (1) Key (36) Timing belt (6) Onboard computer (7) Checks and maintenance (13) MAF sensor (2) Headlight (1) Air filter (3) Cabin air filter (2) Clutch (1) Light bulb (1) Headlight bulb (1) Engine oil (1) Clock (2) Door trim panel (2) Tires (1) Car door (1) Power window switch (1) Instrument cluster (5) Wheel (1) Fuse box (15) Seat (2) Crankshaft position sensor (1) Side mirror (2) Rearview mirror (3) AdBlue warning light (2) Warning light – error code (49) (3) Tire pressure warning light (3) Service warning light (7) Manufacturer emblem (2) Fuel cap (1) Drivetrain (2) EGR valve (1) Steering wheel (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos