Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Ford Vari
    4. : Instrument cluster

Ford Ford Various - Instrument cluster

Instrument Cluster Ford Ford Various ( / )

Ford Ford Various
How to disassemble the center console of the Ford FG Falcon
In the following guide, we will help you complete the removal of the entire central console of your Ford FG Falcon. First of all, enter the cabin and turn off …Read all…
Posted on 23 May 2025 by ScegliAuto
Ford Ford Various
Warning Lights on Our Ford: What They Mean
This video explains in detail the meaning of four important warning lights that may appear on the instrument cluster of your Ford vehicle: the first is the …Read all…
Posted on 13 August 2026 by ScegliAuto
Ford Ford Various
How to Connect Your Phone to Ford Sync
In this video, learn how to correctly connect your phone to the Ford Sync 3 system. First, start your vehicle and ensure Bluetooth is activated on your phone. …Read all…
Posted on 2 November 2026 by ScegliAuto
Ford Ford Various
How to Replace the Dashboard Bulbs of the Ford Ranger
This guide shows how to replace the dashboard bulbs of the Ford Ranger. The first operation to perform is to undo the three 7 mm screws located at the top of …Read all…
Posted on 29 May 2026 by ScegliAuto
Ford Ford Various
Removing the Instrument Cluster on a Ford Car
If you intend to replace the bulbs in the instrument cluster, I recommend disconnecting the battery thirty minutes before starting for safety reasons (negative …Read all…
Posted on 15 May 2026 by ScegliAuto
Airbag (6) Car stereo (15) Battery (3) Transmission (8) Body (4) Control unit (1) Key (36) Timing belt (6) Onboard computer (7) Checks and maintenance (13) MAF sensor (2) Headlight (1) Air filter (3) Cabin air filter (2) Clutch (1) Light bulb (1) Headlight bulb (1) Engine oil (1) Clock (2) Door trim panel (2) Tires (1) Car door (1) Power window switch (1) Instrument cluster (5) Wheel (1) Fuse box (15) Seat (2) Crankshaft position sensor (1) Side mirror (2) Rearview mirror (3) AdBlue warning light (2) Warning light – error code (49) Tire pressure warning light (6) Service warning light (7) Manufacturer emblem (2) Fuel cap (1) Drivetrain (2) EGR valve (1) Steering wheel (2)

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos