Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the center console of the Ford FG Falcon

Model: Ford Ford Various
Part: Instrument cluster

Video tutorial

In the following guide, we will help you complete the removal of the entire central console of your Ford FG Falcon. First of all, enter the cabin and turn off the car if it is still on, then focus your attention on the central console.

Remove the small storage compartment located in the lower area of the console and then unscrew the screws present. Once this is done, disconnect the electrical cable and proceed with the removal of the plastic cover located on the top of the central display.

Finally, unscrew the screws, disconnect the electrical cables, and pull the entire central console towards you until it is completely disassembled.


Posted on 23 May 2025 by ScegliAuto


Related tutorials

How to Replace the Key Battery in the Ford Falcon
Ford Ford Various If your Ford Falcon remote has suddenly stopped working and you want to replace the battery inside, read this guide carefully and follow the instruct…
How to replace the engine air filter of the 2025 Ford Maverick.
How to replace the engine air filter of the 2025 Ford Maverick.
Ford Ford Various Replacing the engine air filter in your new 2025 Ford Maverick is really simple. All you need to do is carefully read the steps described below and f…
How to Remove the EGR Valve from a Ford
How to Remove the EGR Valve from a Ford
Ford Ford Various Removing the EGR valve for periodic cleaning is a very simple task that you can perform independently. On Ford car models, this operation is more or …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos