Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. Ford Vari
  6. : Rearview mirror

Ford Ford Various - Rearview mirror

Rearview Mirror Ford Ford Various ( / )

Ford Ford Various
How to easily remove the interior rearview mirror of a Ford car

In this video, we can see how to remove the interior rearview mirror from a Ford vehicle. We can take the opportunity to treat ourselves to a set of Allen …Read all…
Posted on 19 January 2026 by ScegliAuto
Ford Ford Various
How to Remove the Base of the Rear View Mirror on the Ford Custom

If you want to replace the fixed base of the internal rear view mirror on your Ford Custom 2017 but don't know how to proceed, follow these instructions. You …Read all…
Posted on 4 September 2026 by ScegliAuto
Ford Ford Various
How to Remove the Wing Mirror on Ford Vehicles

Having a fully functional and properly positioned wing mirror significantly enhances driving safety. If you want to remove and/or replace it, just follow the …Read all…
Posted on 23 June 2026 by ScegliAuto

Airbag (6) Car stereo (14) Battery (3) Transmission (8) Body (4) Control unit (1) Key (36) Timing belt (6) Onboard computer (7) Checks and maintenance (13) MAF sensor (2) Headlight (1) Air filter (3) Cabin air filter (2) Clutch (1) Light bulb (1) Headlight bulb (1) Engine oil (1) Clock (2) Door trim panel (2) Tires (1) Car door (1) Power window switch (1) Instrument cluster (5) Wheel (1) Fuse box (15) Seat (2) Crankshaft position sensor (1) Side mirror (2) Rearview mirror (3) AdBlue warning light (2) Warning light – error code (49) (3) Tire pressure warning light (3) Service warning light (7) Manufacturer emblem (2) Fuel cap (1) Drivetrain (2) EGR valve (1) Steering wheel (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos