Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Ford Vari
    4. : Battery

Ford Ford Various - Battery

Battery Ford Ford Various ( / )

Ford Ford Various
How to Reset the Battery Module Detection on a Ford Vehicle
Let's see how to reset the battery module detection via the BMS (Battery Monitoring System). The engine must be off, the key in the ignition in the "off" …Read all…
Posted on 27 April 2026 by ScegliAuto
Ford Ford Various
How to Properly Restart a Ford Vehicle if the Battery is Flat
In this video, you will learn how to properly restart a Ford vehicle whose battery has accidentally gone flat: open the bonnet and identify the positive and …Read all…
Posted on 19 October 2026 by ScegliAuto
Ford Ford Various
Replacing the Battery in a 2018 Ford F350
This video shows how to replace the battery in a 2018 Ford F350. It is not a difficult task and can be done independently. Open the bonnet. The battery is …Read all…
Posted on 3 August 2026 by ScegliAuto
Airbag (6) Car stereo (15) Battery (3) Transmission (8) Body (4) Control unit (1) Key (36) Timing belt (6) Onboard computer (7) Checks and maintenance (13) MAF sensor (2) Headlight (1) Air filter (3) Cabin air filter (2) Clutch (1) Light bulb (1) Headlight bulb (1) Engine oil (1) Clock (2) Door trim panel (2) Tires (1) Car door (1) Power window switch (1) Instrument cluster (5) Wheel (1) Fuse box (15) Seat (2) Crankshaft position sensor (1) Side mirror (2) Rearview mirror (3) AdBlue warning light (2) Warning light – error code (49) Tire pressure warning light (6) Service warning light (7) Manufacturer emblem (2) Fuel cap (1) Drivetrain (2) EGR valve (1) Steering wheel (2)

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos