Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to correctly restart a Ford vehicle if the battery is dead

Model: Ford Ford Various
Part: Battery

In this video we will see how to correctly restart a Ford vehicle whose battery has been accidentally discharged: we open the hood, and identify the positive and negative poles of the battery, and connect the positive end of the jumper cable to the positive pole of the battery, and the negative end to a ground. The example we see in the video refers to a Transit Connect; we then see the location on a Ford Ranger; then on a Transit Custom, and finally on the Transit. Making the correct connections is very important, or you risk damaging the vehicle. In the engine compartment there are stickers that will help us locate the exact points. After connecting the cables, we start the support vehicle - or turn on the booster - for a few minutes, then start our vehicle.

Posted on 19 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the battery management system on Ford vehicles
How to reset the battery management system on Ford vehicles
Ford Ford Various In this video, see how to reset the Battery Management System (BMS) on a Ford C-Max, but the system is applicable to all Ford vehicles. Each time you…
How to Reset the Battery Module Detection on a Ford Vehicle
How to Reset the Battery Module Detection on a Ford Vehicle
Ford Ford Various Let's see how to reset the battery module detection via the BMS (Battery Monitoring System). The engine must be off, the key in the ignition in the "…
Replacing the Key Battery on a Ford
Replacing the Key Battery on a Ford
Ford Ford Various In this video, you will learn how to replace the battery in a Ford key remote. First, pry off the plastic cover (the cover with the emblem): use a sc…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos