Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Seats in a Ford Fusion?

Model: Ford Fusion North America MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Seat

See other generations:
Video tutorial

In this tutorial, you will see how to remove the rear seats in a Ford Fusion, a very simple and quick operation. First, open both rear doors and the trunk.

Then, grab the seat from the front side, pull it up firmly, and separate it from the base. Next, remove the seat belts using a T50 Torx wrench, unscrew the 4 front bolts of the seatbacks, lower them, and unscrew the additional 4 rear bolts.

At this point, you can pull the seatbacks out of the cabin and install any replacement parts.


Updated on 22 October 2026 by ScegliAuto


Related tutorials

Removing the rear seatbelt of the Ford Fusion
Removing the rear seatbelt of the Ford Fusion
Ford Fusion North America (2013-2020 / MK 2) Today, let's explore useful information on how to remove and replace the rear seatbelt of the Ford Fusion, following the instructions below. First, a…
Removing the Taillights and Bulbs on a Ford Fusion
Removing the Taillights and Bulbs on a Ford Fusion
Ford Fusion North America (2006-2012 / MK 1) Today, let's go through the instructions to remove and replace the taillight and its bulbs on a Ford Fusion. First, open the trunk lid and start by r…
How to Replace the Rear Headlight on the Ford Fusion North America
How to Replace the Rear Headlight on the Ford Fusion North America
Ford Fusion North America (2013-2020 / MK 2) In this guide, you will see how to remove and replace the rear headlight on the Ford Fusion North America in simple and quick steps. First, open the …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos