Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Taillights and Bulbs on a Ford Fusion

Model: Ford Fusion North America MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Tail light

See other generations:
Video tutorial

Today, let's go through the instructions to remove and replace the taillight and its bulbs on a Ford Fusion. First, open the trunk lid and start by removing the plastic cover found behind the body; then unscrew the screws securing the taillight and disconnect the electrical connector for the bulbs, as shown in the video.

At this point, separate the socket from the housing and replace the bulbs with new ones that have the same base; finally, reassemble the taillight by applying the reverse procedure!


Updated on 30 August 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper from a Ford Fusion North America?
How to Remove the Rear Bumper from a Ford Fusion North America?
Ford Fusion North America (2006-2012 / MK 1) To remove the rear bumper from the Ford Fusion, open the trunk to detach the seal around the trunk opening. Once the seal is removed, detach the blac…
How to put the parking brake in service mode on the Ford Fusion
How to put the parking brake in service mode on the Ford Fusion
Ford Fusion North America (2013-2020 / MK 2) In this guide we will see the instructions that will allow us to put the parking brake in service mode, necessary to replace the rear brake pads of t…
Replacement of the hybrid engine battery of the Ford Fusion
Replacement of the hybrid engine battery of the Ford Fusion
Ford Fusion North America (2013-2020 / MK 2) In this guide we will see the main instructions on how to disassemble and replace the battery of the Ford Fusion hybrid engine, relying on a speciali…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos