Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to put the parking brake in service mode on the Ford Fusion

Model: Ford Fusion North America MK 2 - Years 2013-2020
Part: Checks and maintenance

In this guide we will see the instructions that will allow us to put the parking brake in service mode, necessary to replace the rear brake pads of the Ford Fusion. First of all, we get on board the car and start the instrument panel; then we press and hold down the accelerator pedal and at the same time the parking brake button, as shown in the video. At this point, turn off the instrument panel to complete the operation; lift the car and proceed with the disassembly of the brake caliper and the replacement of the pads!

Posted on 19 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the Ford Fusion located?
Where is the fuse box of the Ford Fusion located?
Ford Fusion North America (2006-2012 / MK 1) If you don't know where the fuse box is located inside the cabin of your first-generation Ford Fusion, don't worry because with the following guide y…
How to reset the tire pressure sensor on a Ford Fusion
How to reset the tire pressure sensor on a Ford Fusion
Ford Fusion North America (2013-2020 / MK 2) Today we will see how to reset the tire pressure sensors on a Ford Fusion, a second-generation sedan model produced from 2013 to 2020. Let's start by…
How to reset the TPMS light on the Ford Fusion
How to reset the TPMS light on the Ford Fusion
Ford Fusion North America (2006-2012 / MK 1) The TPMS warning light reset on a 2012 Ford Fusion must be done using a tire pressure scanner. Turn on the ignition and enter the reset mode by press…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos