Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : How to replace the rear view mirror of the Ford Fiesta

Ford Fiesta - Video tutorial

Model: Ford Fiesta Fiesta 5, MK V, MK 5 - Years 2002-2008
Part: Outside rearview mirror
Operation: How to replace the rear view mirror of the Ford Fiesta

As a first operation to make this replacement it will be necessary to extract the old broken mirror, then to do this, rotate the inclination of the mirror outwards and it will be enough to pull it towards you to release the clips that fix the mirror in its position and the various pins to pressure, then you can now compare the rear of the mirror for safety to verify that they are the same, in this way you can reassemble the new mirror in its original position, following the steps described backwards for reassembling the new mirror.


Posted on 6 October 2023 by ScegliAuto

This video is currently unavailable

    Frequently Asked Questions

    • Fiesta 2008-2017 - How to remove the rearview mirror of a Ford Fista VI? Read Answer
    • Fiesta 2008-2017 - How much does it cost to replace the exterior mirror on the Ford Fiesta? Read Answer
    • Fiesta 2008-2017 - How much does the Ford Fiesta VI exterior rear view mirror cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos