Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement or installation of the Ford Focus clutch pedal spring.

Model: Ford Focus Focus 2, MK 2 - Years 2004-2011

Today's main steps will show us how to replace or install the clutch pedal spring of the Ford Focus. First, we open the front driver's side door and begin to remove the plastic cover above the pedals; then we use a thin tool to release the clutch pedal spring, removing it from the hole, as shown in the video. At this point, we replace and install the new original pedal spring, checking its proper functioning; if necessary, we adjust the pedal travel from the clutch cable adjuster.

Posted on 23 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to remove the clutch pedal of a Ford Focus
How to remove the clutch pedal of a Ford Focus
Ford Focus (2011-2018 / MK 3) We begin by entering the passenger compartment, more precisely in the driver's seat. We therefore proceed by going to remove the carpet present in th…
How to replace the clutch pedal on a Ford Focus.
How to replace the clutch pedal on a Ford Focus.
Ford Focus (2011-2018 / MK 3) Below we will see the main instructions on how to disassemble and replace the clutch pedal of the Ford Focus. First, we open the engine hood and star…
How to replace the master cylinder of the Ford Focus clutch
How to replace the master cylinder of the Ford Focus clutch
Ford Focus (1998-2004 / MK 1) Today's guide will show us the main instructions on how to disassemble and replace the clutch master cylinder of the Ford Focus. First, we open the h…

How to Remove the Bumper on an Alfa Romeo Mito

In this video, learn how to remove the front bumper on an Alfa Romeo Mito. Lift the engine bonnet and secure it. Use a plastic lever to remove the rivets/screws located at the top of the bumper. Once the rivets at the top are removed, unscrew the rivets of the splash guards and remove the pins located at the bottom of the bumper. Remove the bumper from the vehicle body. To proceed with the reassembly: hold the bumper against the vehicle body and tighten all screws around the splash guard and along its perimeter.

Watch the video!


by ScegliAuto

More videos