Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on a Ford Focus 1.0 EcoBoost

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tire pressure warning light

See other generations:
Video tutorial

In this article, you will learn how to reset the tyre pressure warning light on a Ford Focus. This procedure is useful if the light remains on after restoring the correct tyre pressure.

Start the instrument cluster without starting the engine, then press the left arrow button to open the menu. Use the down arrow button to navigate to 'Driver Assist' and select it by pressing the OK button.

Scroll down to 'Tyre Monitor' and select it with the OK button. Press and hold the OK button to reset it. Once reset, you can release the button and restart the cluster to check if the procedure was successful.


Updated on 3 November 2026 by ScegliAuto


Related tutorials

Replacing the High-Pressure Fuel Pump on Ford Focus 2.0T Ecoboost
Replacing the High-Pressure Fuel Pump on Ford Focus 2.0T Ecoboost
Ford Focus (2011-2018 / MK 3) Today, we will discover the instructions and steps to remove and replace the high-pressure fuel pump on the Ford Focus 2.0T Ecoboost. First, open the…
How to Replace the Timing Belt on a Ford Focus 1.0 EcoBoost?
How to Replace the Timing Belt on a Ford Focus 1.0 EcoBoost?
Ford Focus (2011-2018 / MK 3) To carry out the replacement of the timing belt on a Ford Focus 1.0 EcoBoost, you need to loosen the screws that secure the front right wheel of the …
How to Replace the Timing Belt on the Ford Focus 1.0 EcoBoost?
How to Replace the Timing Belt on the Ford Focus 1.0 EcoBoost?
Ford Focus (2011-2018 / MK 3) To replace the timing belt on the Ford Focus 1.0 EcoBoost, loosen the bolts securing the front right wheel of the car so that it can be removed along…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos