Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windscreen Washer Nozzles on a Ford Focus?

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Windshield washer nozzle

See other generations:
Video tutorial

In this tutorial, you will see how to replace the windscreen washer nozzles on a Ford Focus, a very simple and quick task. First, open the bonnet, then locate the plastic ring on the joint of the first nozzle, loosen it, and remove it. Next, disconnect the tube from the joint, press the two securing clips indicated, and pull the nozzle out from the bonnet.

At this point, simply insert the replacement, secure it, and reconnect the tube using the appropriate clip. Finally, repeat the process on the nozzle on the opposite side, if necessary.


Updated on 4 November 2026 by ScegliAuto


Related tutorials

Removing the Windscreen Washer Pump from a Ford Focus
Removing the Windscreen Washer Pump from a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Today, in this tutorial video, you will see how to remove the windscreen washer pump from a Ford Focus. Start by removing the front right wheel and l…
Replacing the Windscreen Washer Reservoir on a Ford Focus
Replacing the Windscreen Washer Reservoir on a Ford Focus
Ford Focus (2011-2018 / MK 3) To replace the windscreen washer reservoir on a Ford Focus, first, position the car on a lift or on a flat surface, securely immobilised. The first o…
Replacing the Windscreen Washer Pump on a Ford Focus
Replacing the Windscreen Washer Pump on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Below are the steps that will allow you to disassemble and replace the windscreen washer pump on a Ford Focus. First, lift the vehicle to remove the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos