Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Windscreen Washer Pump from a Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Pump

Today, in this tutorial video, you will see how to remove the windscreen washer pump from a Ford Focus. Start by removing the front right wheel and lift the car with a jack: at this point, remove the wheel arch liner by unscrewing its screws to access the rear where the pump is located. Unscrew the screws at the top of the bonnet to remove the washer fluid reservoir and disconnect the electrical connector from the pump that allows you to operate the washer when needed. Disconnect the hoses and extract the pump from the reservoir!

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Windscreen Washer Pump on a Ford Focus
Replacing the Windscreen Washer Pump on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Below are the steps that will allow you to disassemble and replace the windscreen washer pump on a Ford Focus. First, lift the vehicle to remove the …
How to Remove the Washer Fluid Reservoir and Pump on a Ford Focus
How to Remove the Washer Fluid Reservoir and Pump on a Ford Focus
Ford Focus (2011-2018 / MK 3) In this video, you will see the instructions on how to remove the washer fluid reservoir and pump on a Ford Focus Mk3. First, lift the vehicle from t…
Instructions for Removing the Windscreen Washer Reservoir
Instructions for Removing the Windscreen Washer Reservoir
Ford Focus (2011-2018 / MK 3) To remove the windscreen washer reservoir, first remove the front bumper to access the reservoir itself. Once the bumper is removed (refer to the rel…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos