Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing and Cleaning the Windscreen Washer Reservoir on Ford Focus 2

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011

In today's tutorial, you will learn how to remove and clean the windscreen washer reservoir on a second-generation Ford Focus. First, lift the vehicle on the right side and remove the front wheel; then unscrew the Torx screws found on the wheel arch and remove it to access the washer fluid reservoir. Next, remove the upper fastening screws of the reservoir from the engine bay, and also unscrew the lower ones; all that’s left is to pull out the fluid tank, disconnecting the various hoses and the electrical connector.

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Windscreen Washer Reservoir on a Ford Focus
Replacing the Windscreen Washer Reservoir on a Ford Focus
Ford Focus (2011-2018 / MK 3) To replace the windscreen washer reservoir on a Ford Focus, first, position the car on a lift or on a flat surface, securely immobilised. The first o…
Removing the Windscreen Washer Pump from a Ford Focus
Removing the Windscreen Washer Pump from a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Today, in this tutorial video, you will see how to remove the windscreen washer pump from a Ford Focus. Start by removing the front right wheel and l…
Replacing the Windscreen Washer Pump on a Ford Focus
Replacing the Windscreen Washer Pump on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Below are the steps that will allow you to disassemble and replace the windscreen washer pump on a Ford Focus. First, lift the vehicle to remove the …

    Frequently Asked Questions

    • Focus 2004-2011 - Where are the fuse boxes in the Ford Focus Mk2? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos