Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the TPMS light on the Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Tire pressure warning light

See other generations:
Video tutorial

The TPMS light related to tyre pressure illuminates on a Ford Fiesta when it is necessary to adjust the pressure. First, adjust the pressure of each tyre using the parameters indicated by Ford. These parameters are listed on a label inside the driver's side front door.

Using a pressure gauge, an air compressor, and a torque wrench, remove the valve cap, connect the gauge to the compressor, and adjust the tyre pressure. After performing the same operation on all tyres, get in the vehicle to turn on the instrument panel and complete the reset.


Updated on 6 November 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on a Ford Fiesta
How to Reset the Tyre Pressure Warning Light on a Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In this short and simple guide, you will learn how to reset the tyre pressure warning light on a Ford Fiesta. First, get inside the vehicle and start…
How to reset the tire pressure warning on the Ford Fiesta.
How to reset the tire pressure warning on the Ford Fiesta.
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) The tire pressure warning that appears on the instrument cluster display indicates that we need to check the pressures in order to reset the pressure…
How to Reset the Service Light on a Ford Fiesta?
How to Reset the Service Light on a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) To reset the Service light on a Ford Fiesta, enter the cabin and press the brake and accelerator pedals simultaneously. While holding these down, ins…

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos