Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front seat of a Ford C-Max?

Model: Ford C Max MK 2 - Years 2010-2019
Part: Seat

To remove the front seat of a Ford C-Max, start by moving the seat all the way back. Then, locate the fixing bolts on the seat track near the car floor. Using an appropriate wrench, unscrew the bolts to remove the seat from the track. Make sure to keep track of all the bolts and any covers that may hide the fixing points. Once the bolts are removed, tilt the seat backwards or forwards to access the electrical connectors or wiring under the seat. Carefully disconnect all the electrical connectors, making sure not to damage the cables during the process. Once the connectors are disconnected, you can lift the seat off the track and remove it from the car. Pay attention to the weight of the seat and ask for assistance if needed to avoid injuries or damages. Once the seat is removed, you can proceed with any necessary repairs or maintenance.

Posted on 4 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Where is and how to reach the fuse box of a Ford C-Max?
Where is and how to reach the fuse box of a Ford C-Max?
Ford C Max (2003-2010 / MK 1) Today we will focus on identifying and reaching the fuse box of our Ford C Max. We start by opening the front passenger door. Then, we will need to b…
How to Fit the Front Bumper on a Ford C-Max
How to Fit the Front Bumper on a Ford C-Max
Ford C Max (2010-2019 / MK 2) Before starting, open the bonnet of your Ford C-Max. Begin by positioning the front bumper in its housing. Next, secure the rear fastening clips. Onc…
How to Remove the Rear Seat on a Ford C-MAX
How to Remove the Rear Seat on a Ford C-MAX
Ford C Max (2010-2019 / MK 2) Today, we will see how to remove the seats on a Ford C-MAX in this short video; it is a task that anyone can do without needing to consult a professi…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos