Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the car radio on a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Car stereo

See other generations:
Video tutorial

Here are some methods you could try: - Reset via buttons: turn on the car and make sure the radio is on. Press and hold the power button and the forward track button simultaneously for about 10 seconds. This should restart the radio and unlock any blocks. - Master reset via secret menu: put the key in the "accessory" position (without starting the engine).

Press and hold the "OK" button on the dashboard. Turn the key to the "on" position.

The word "test" will appear and you can select the option to restore the radio's factory settings. - Disassembly and replacement of the radio: if the reset via buttons does not work, you may need to disassemble the radio. Remove the bezel (the decorative part around the radio) and disconnect the cable.

Then, remove the radio box with a T25 key and disconnect the three cables. Buy a new radio and connect the cables and antenna.

Test the new radio and reassemble everything. - Reset via battery disconnection: disconnect the negative battery cable for 15-30 minutes. This will allow the radio system to completely discharge and reset.


Posted on 18 December 2024 by ScegliAuto


Related tutorials

Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) How to remove the radio from a Ford Fiesta? Use original removal keys for the radio. Insert the keys into the holes on the plastic cover of the radio…
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In this guide, we will go through the steps to restore the Bluetooth connection issue of the Ford Fiesta. First, get into the vehicle and start by op…
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) Thanks to the following video tutorial, we will show you the steps to remove the Ford 6000 CD radio from Ford vehicles. The Ford vehicles on which we…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos