Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Antenna on a Ford Mondeo

Model: Ford Mondeo / Fusion MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Antenna

See other generations:
Video tutorial

In this video, learn how to replace the antenna and its support on the roof of the Ford Mondeo. Use a screwdriver to pry between the interior light and the headlining (without damaging the headlining), remove the interior light from the panel and disconnect the power connector.

Unscrew the securing bolt of the antenna support (located between the metal and the support). Fit the new support onto the roof of the car (screw the bolt in with the screwdriver until fully tightened).

Test the antenna's proper functioning by turning on the car radio.


Updated on 1 March 2026 by ScegliAuto


Related tutorials

How to Remove and Replace the Antenna on Ford Mondeo MK3
How to Remove and Replace the Antenna on Ford Mondeo MK3
Ford Mondeo / Fusion (2000-2007 / MK 2) In today's video tutorial, you will learn how to remove and replace the antenna and its base on a Ford Mondeo third series, following these simple st…
How to replace the antenna on a Ford Mondeo?
How to replace the antenna on a Ford Mondeo?
Ford Mondeo / Fusion (2000-2007 / MK 2) To replace the antenna on a Ford Mondeo, access the interior of the vehicle by opening the glove compartment located near the interior light. This wi…
Removing Antenna from Ford Mondeo
Removing Antenna from Ford Mondeo
Ford Mondeo / Fusion (2000-2007 / MK 2) To remove the antenna from the roof of a Ford Mondeo, start by removing the interior light from the roof cover panel. Pull the light out of the panel…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos