Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Antenna from Ford Mondeo

Model: Ford Mondeo / Fusion MK 2 - Years 2000-2007
Part: Antenna

To remove the antenna from the roof of a Ford Mondeo, start by removing the interior light from the roof cover panel. Pull the light out of the panel and disconnect the power connector. Unscrew the fastening bolt of the antenna mount (located between the metal and the mount). Install the new antenna mount on the roof of the car (tighten the bolt with a screwdriver until fully secured). Test the antenna's functionality. Turn on the ignition with the key and press the radio power button. Scroll through the channels and check the antenna reception.

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the antenna on a Ford Mondeo?
How to replace the antenna on a Ford Mondeo?
Ford Mondeo / Fusion (2000-2007 / MK 2) To replace the antenna on a Ford Mondeo, access the interior of the vehicle by opening the glove compartment located near the interior light. This wi…
How to Remove and Replace the Antenna on Ford Mondeo MK3
How to Remove and Replace the Antenna on Ford Mondeo MK3
Ford Mondeo / Fusion (2000-2007 / MK 2) In today's video tutorial, you will learn how to remove and replace the antenna and its base on a Ford Mondeo third series, following these simple st…
How to Replace the Antenna on a Ford Mondeo
How to Replace the Antenna on a Ford Mondeo
Ford Mondeo / Fusion (2000-2007 / MK 2) In this video, learn how to replace the antenna and its support on the roof of the Ford Mondeo. Use a screwdriver to pry between the interior light a…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos