Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Headrests on a Ford B Max

Model: Ford B Max MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Seat

Video tutorial

Learn how to remove the front headrest on a Ford B Max. This video explains the procedure: First, open the door and enter the rear of the car (rear passenger seat). Then, press the button located under the left rail of the front headrest, while simultaneously using a plastic lever to press in the slot on the right side of the rail.

Raise the headrest until it is free from the front backrest. To fit the front headrest, simply follow the disassembly steps outlined earlier.


Updated on 1 March 2026 by ScegliAuto


Related tutorials

How to Replace the Fan Resistor on a Ford B-Max
How to Replace the Fan Resistor on a Ford B-Max
Ford B Max (2012-2018 / MK 1) Before you begin, open the front passenger door of your Ford B-Max. Start by removing the panel located at the bottom of the centre tunnel. Next, dis…
How do you replace the car radio in a Ford B-Max?
How do you replace the car radio in a Ford B-Max?
Ford B Max (2012-2018 / MK 1) It will be possible to replace the car radio of the Ford B-Max by using a tool to pry off the trim panel surrounding the radio. Once the underlying r…
How to Replace the Timing Belt on a Ford B-Max
How to Replace the Timing Belt on a Ford B-Max
Ford B Max (2012-2018 / MK 1) To replace the timing belt on a Ford B-Max, lift the vehicle with a jack or ramp to remove the front right wheel and the corresponding wheel arch, al…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos