Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear light of the Ford Fiesta MK7

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: License plate light

See other generations:
Video tutorial

Today we will explain how to replace the license plate light of the Ford Fiesta model MK7. To replace the license plate light, we need to use a small flat-tip screwdriver to remove the light located above the license plate. After removing the light, disconnect it from the connector so that we can proceed with the replacement of the bulb.

After inserting the bulb, connect it to the connector and insert the light back into its housing. Repeat the same procedure for the light next to it and turn on the vehicle lights to test their operation.


Posted on 16 January 2025 by ScegliAuto


Related tutorials

How do you reset the Service light on the Ford Fiesta?
How do you reset the Service light on the Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) It will be possible to reset the Service light shown on the instrument panel of the Ford Fiesta by turning on the ignition, inserting the ignition ke…
Where is the OBD2 port located on the 2021 Ford Fiesta?
Where is the OBD2 port located on the 2021 Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In the following guide, you will find the description of all the steps you need to follow in order to find the OBD2 port located inside the cabin of …
How to Reset the Service Light on the Ford Fiesta Mk7
How to Reset the Service Light on the Ford Fiesta Mk7
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) If you intend to manually reset the service light on your Ford Fiesta Mk7, simply follow this guide and put it into practice. First, get into the car…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos