|
Do it yourself
| |||
| ||||
Video tutorial
To program a key with Lonsdor K518, you need to arm yourself with a lot of patience and the right tools, don't be scared and follow these steps. Connect it to the car's OBD port and turn on the ignition, go to Ford in the menu, select the model and year then enter the Immo System function. Now you need the PIN code, you can extract it with the same K518 or if you can't find it you can use another tool like VVDI. After obtaining the PIN, proceed to pre-code; if the key is new, it must be prepared with the correct chip, usually ID49. Then go to Add key, follow the instructions and when prompted, insert the new key into the ignition. After programming, turn everything off, try to start the car and verify that it works. If necessary, also synchronize the remote control. I realize that these are complex procedures to do in DIY mode, but surely the most experienced will know how to handle them. If you don't feel confident, contact a specialized workshop.
Posted on 25 March 2025 by ScegliAuto
Related tutorials
Ford Ka
(2016-2019 /
MK 3)
The Service light that is shown on the instrument panel of the Ford Ka can be reset by holding down the button located on the right side of the instr…
Ford Ka
(2016-2019 /
MK 3)
On the instrument panel of the Ford Ka, the Service light that appears can be reset by holding down the button located on the right side of the instr…
Ford Ka
(2016-2019 /
MK 3)
To reset the Service light on the Ford Ka, press and hold the button located on the right side of the instrument cluster. While holding it, insert th…
Other guides you may be interested in
|
How to Reset the AdBlue Warning Light on a Peugeot Boxer
To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.084
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
