Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to repair the anti-theft system of the Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Warning light – error code

In this guide we will see the instructions that will allow us to repair the anti-theft system of the Ford Focus, with the following error codes: U0140, U0155, U0001, U0131. In order to check the error codes on the anti-theft system, it is necessary to use a diagnostic software, to be connected to the OBD port of the ECU; we then proceed to reset the errors after solving the problem related to the anti-theft system, as shown in the video. We then verify that all errors have been reset on the ECU, confirming the operation of the anti-theft system.

Posted on 13 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you deactivate the alarm of the Ford Focus 2?
How do you deactivate the alarm of the Ford Focus 2?
Ford Focus (2004-2011 / MK 2, Focus 2) From this video guide, we learn about the Ford Focus 2, where the alarm control unit is located and how to disable it. The aforementioned deactivatio…
How to Disable the Alarm on a Ford Focus
How to Disable the Alarm on a Ford Focus
Ford Focus (2011-2018 / MK 3) This guide provides instructions to disable the alarm on a Ford Focus by following these simple steps. First, get into the vehicle from the passenger…
How to Disable the Ford Focus Alarm?
How to Disable the Ford Focus Alarm?
Ford Focus (2011-2018 / MK 3) To disable the alarm on the Ford Focus, connect a diagnostic tool to the vehicle's OBD port: this is located on the lower left side of the dashboard,…

    Frequently Asked Questions

    • Focus 2004-2011 - How to find the radio code of the Ford Focus 6000 CD? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos