Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure warning on the Ford Escape

Model: Ford Escape MK 2 - Years: 2008, 2009, 2010, 2011, 2012
Part: Tire pressure warning light

See other generations:
Video tutorial

Today we will discover the instructions that will allow us to reset the tire pressure warning of the Ford Escape; before performing the TPMS sensor reset, it is necessary that all four tires are at the correct pressure. In order to recalibrate the TPMS sensors, it is necessary to use a specific diagnostic tool; by approaching it to the pressure sensor, we will then register it, consequently resetting the TPMS warning on the instrument panel; finally, turn off the panel and start the engine, verifying the actual reset!


Posted on 24 June 2025 by ScegliAuto


Related tutorials

Reset of the tire pressure warning light for the Ford Escape.
Reset of the tire pressure warning light for the Ford Escape.
Ford Escape (2020-2026 / MK 4) Today we will discover how to reset the tire pressure warning for the Ford Escape, as well as the Ford Kuga. Before resetting the TPMS sensors, it is…
Resetting the Service Light on a Ford Escape
Resetting the Service Light on a Ford Escape
Ford Escape (2013-2019 / MK 3) In this useful guide, you will learn how to reset the service light on a third-generation Ford Escape. Start the procedure by turning the vehicle's i…
Service Reset on a Ford Escape
Service Reset on a Ford Escape
Ford Escape (2013-2019 / MK 3) As shown in today's tutorial video, resetting the service light on a Ford Escape (2013-2019) is a very easy and quick task that you can do on your ow…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos