Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Service Reset on a Ford Escape

Model: Ford Escape MK 3 - Years 2013-2019
Part: Warning light – error code

As shown in today's tutorial video, resetting the service light on a Ford Escape (2013-2019) is a very easy and quick task that you can do on your own after changing the engine oil in your vehicle. Let's go through the procedure. First, turn on the vehicle's ignition without starting the engine. Next, press and hold the brake and accelerator pedals. Once you do this, you will see a reset notification appear on the speedometer, so continue to hold the pedals until the reset completed notification shows up.

Updated on 9 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the service of a Ford Escape
Resetting the service of a Ford Escape
Ford Escape (2013-2019 / MK 3) Through this very useful guide today, you will see how to reset the service light on a third-generation Ford Escape. Let's start the procedure by tur…
Oil reset on a Ford Escape
Oil reset on a Ford Escape
Ford Escape (2013-2019 / MK 3) In today's video, we will see how to reset the engine oil service light on a third-generation Ford Escape without using external diagnostic tools. Le…
How to reset the oil light on the Ford Escape
How to reset the oil light on the Ford Escape
Ford Escape (2013-2019 / MK 3) In this new guide of ours, we will describe all the steps you need to follow if you intend to manually reset the engine oil light on the display of t…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos