Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil Change on Ford Escape 2.5L

Model: Ford Escape MK 2 - Years 2008-2012
Part: Engine oil

In today's tutorial video, discover how to change the engine oil on a Ford Escape with a 2.5-liter engine produced from 2008 to 2012. Start by raising the vehicle and placing a drain pan under the oil pan. Then, remove the oil pan bolt and let all the used oil drain out. Allow it to drain completely and replace the bolt. Next, move the drain pan under the oil filter, located next to the oil pan, and simply remove it by unscrewing. Clean the mounting area and install a new filter, lubricating the gasket ring first. Finally, move to the engine compartment to add the new oil.

Updated on 19 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on a 2013 Ford Escape
How to Reset the Oil Light on a 2013 Ford Escape
Ford Escape (2013-2019 / MK 3) This video shows how to reset the oil change light on a 2013 Ford Escape if the light remains on after an oil change. To reset the light, get in the …
How to reset the oil light on the Ford Escape 3
How to reset the oil light on the Ford Escape 3
Ford Escape (2013-2019 / MK 3) If you want to manually reset the oil engine light of your third edition Ford Escape, all you have to do is carefully follow the steps described in t…
How to reset the service light (oil change) on the Ford Escape
How to reset the service light (oil change) on the Ford Escape
Ford Escape (2013-2019 / MK 3) Today we will see the instructions on how to reset the service light for the regular maintenance of the engine oil change for the Ford Escape. First …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos