Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Ford Escape

Model: Ford Escape MK 2 - Years: 2008, 2009, 2010, 2011, 2012
Part: Engine oil

See other generations:
Video tutorial

In this short video tutorial, learn how to change the oil on a Ford Escape produced from 2008 to 2012. First, lift the vehicle, then place a drain pan under the oil pan and remove the oil pan bolt to let all the old oil drain out. Allow it to drain completely and replace the bolt on the pan. Move the drain pan under the old filter and remove it. After draining, install a new oil filter, lubricating its gasket with a bit of oil first.

After removing the old oil and changing the filter, add new oil, and you are done.


Updated on 3 June 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in a Ford Escape?
How to Change the Engine Oil in a Ford Escape?
Ford Escape (2001-2007 / MK 1) Every one to two years at most, you need to service the Ford Escape by replacing the engine oil and the corresponding filter. The video explains how …
How to reset the oil light on the Ford Escape 3
How to reset the oil light on the Ford Escape 3
Ford Escape (2013-2019 / MK 3) If you want to manually reset the oil engine light of your third edition Ford Escape, all you have to do is carefully follow the steps described in t…
How to restore the oil light on the 2015 Ford Escape
How to restore the oil light on the 2015 Ford Escape
Ford Escape (2013-2019 / MK 3) When the oil pressure warning light continues to illuminate on the instrument panel display of your third generation Ford Escape (2015) even after yo…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos