Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil of the Ford Escape?

Model: Ford Escape MK 1 - Years 2001-2007
Part: Engine oil

To change the engine oil of the Ford Escape, access the underside of the vehicle, near the oil pan. Here you will find the oil drain plug, which must be opened to collect the used oil in a properly positioned container. Once the old oil has completely drained, close the drain plug and access the engine compartment. Here, add the new oil through the fill hole located at the lower left of the engine block; after filling, close the hole with its cap.

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Escape (2001-2007 / MK 1) Every one to two years at most, you need to service the Ford Escape by replacing the engine oil and the corresponding filter. The video explains how …
Ford Escape (2008-2012 / MK 2) In today's tutorial video, discover how to change the engine oil on a Ford Escape with a 2.5-liter engine produced from 2008 to 2012. Start by raisin…
Ford Escape (2013-2019 / MK 3) In this video tutorial, you will see how to reset the oil light on a Ford Escape. The first thing you must do if the oil maintenance light comes on i…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos