Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the transmission control module of the Ford Escape?

Model: Ford Escape MK 3 - Years 2013-2019
Part: Drivetrain

The sudden inability to change gears in the Ford Escape, unless it is a gear breakage or other type of damage to be treated in the workshop, could be solved by means of an electronic reset. The protagonist of the video shows how moving the lever of the aforementioned automatic transmission does not do anything, which is why a reset was chosen, carried out through a specific software installed on the PC, which is then connected to the OBD socket and consequently to the ECU. After selecting the car model, the module to be reset is searched for and the operation is authorized.

Posted on 14 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Ford Escape (2001-2007 / MK 1) The 2006 Ford Escape has two fuse boxes inside. The first fuse box is located inside the cabin, behind a small panel on the side of the central dashb…
Ford Escape (2001-2007 / MK 1) The instructions in this guide will show you the procedure for removing and replacing the lock actuator on the Ford Escape. First, open the front doo…
Ford Escape (2013-2019 / MK 3) Today, you will learn how to remove and replace the rear hatch panel on a Ford Escape. First, open the trunk and start removing the plastic trim piec…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos