Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery of the Ford Focus MK4

Model: Ford Focus MK 4 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Battery

See other generations:
Video tutorial

In this video, we see how to change the battery of the Ford Focus: in this case, it is the ST Line, but the procedure is the same for all MK4 models: the battery is located inside the engine compartment, on the right side, looking at the car from the front.

We start as always by disconnecting the negative pole, and then keeping it well away from the battery.

We also remove the positive pole, moving the electrical cable that passes over the battery. We grip the battery by the handles and pull it towards us: it is not secured to any other bracket.

We reattach the new one in its place, put the cable back in place, and then reconnect the positive pole first and the negative pole last. And it's done.


Posted on 24 July 2025 by ScegliAuto


Related tutorials

How to Change the Headlight of a Ford Focus MK4
How to Change the Headlight of a Ford Focus MK4
Ford Focus (2018-2025 / MK 4) Let's see how to change the dipped beam bulb of the Ford Focus MK4: this is not as straightforward as on previous models, as you need to remove the e…
How to Replace the Key Battery on the Ford Focus/Ford Fiesta
How to Replace the Key Battery on the Ford Focus/Ford Fiesta
Ford Focus (2018-2025 / MK 4) To change the battery of the Ford Fiesta/Focus key, you will need a small flathead screwdriver and a new battery (CR2032, 3 volts). Start by removing…
How to change the battery of the key fob remote for a Ford Focus
How to change the battery of the key fob remote for a Ford Focus
Ford Focus (2018-2025 / MK 4) In the tutorial in question, we see how to replace the battery of the key remote for a Ford Focus car. First, take the key remote in hand and press t…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos