Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to access the internal fuses of the Ford Ecosport

Model: Ford Ecosport Bv226 - Years 2003-2012
Part: Fuse box

Below we will see the instructions that will allow us to access the internal fuse box of the Ford Ecosport. First, we get on board the passenger compartment and start removing the plastic side panel located on the driver's side, thus accessing the internal fuses; usually, inside the cover, we find the fuse layout and diagram, also available in the vehicle's owner's manual, as shown in the video. At this point, we replace any faulty fuses with new ones, respecting the amperage, finally fixing the plastic cover.

Posted on 29 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Access the Fuse Box on the Ford Ecosport
How to Access the Fuse Box on the Ford Ecosport
Ford Ecosport (2003-2012 / Bv226) Today, you will learn how to access the fuse box located inside the cabin of the Ford Ecosport. The fuse box is behind the central glove compartment …
Where is the fuse box of the Ford Ecosport located?
Where is the fuse box of the Ford Ecosport located?
Ford Ecosport (2003-2012 / Bv226) The Ford Ecosport produced from 2006 to 2008 has two fuse boxes and one relay box inside. The first fuse box is located inside the cabin, on the left…
What is the fuse diagram for the Ford EcoSport?
What is the fuse diagram for the Ford EcoSport?
Ford Ecosport (2012-2023 / BK, MK 1) In this video, you can see where the fuse boxes are located in the Ford EcoSport and their respective diagrams, to consult in case you need to check …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos