Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the 2016 Ford Mondeo remote control

Model: Ford Mondeo / Fusion MK 4 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Key

See other generations:
Video tutorial

Today we will explain how to replace the battery of the remote control of a 2016 Ford Amodeo car model mk4. To replace the battery, we need to use a flathead screwdriver or a plastic tool. Insert the tool into the groove on the left side of the remote control, so that we can apply slight pressure to open the remote control.

Remove the microchip to access the battery compartment. Replace the battery and after reassembling the microchip, close the remote control.

The battery to be installed in the remote control is a CR 20 32, available in stores or online for €3.


Posted on 14 August 2025 by ScegliAuto


Related tutorials

How to Replace the Remote Battery on a Ford Mondeo?
How to Replace the Remote Battery on a Ford Mondeo?
Ford Mondeo / Fusion (2014-2021 / MK 4) To replace the battery in the remote for a Ford Mondeo, slide the key out from the top of the device to leverage it open. Once this is done, open the…
How to Replace the Key Fob Battery on the Ford Mondeo MK4
How to Replace the Key Fob Battery on the Ford Mondeo MK4
Ford Mondeo / Fusion (2014-2021 / MK 4) In this tutorial, you will learn how to dismantle and replace the battery of the key fob on the Ford Mondeo fourth generation in simple steps. First,…
How to Replace the Remote Battery of the Ford Mondeo
How to Replace the Remote Battery of the Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) Today, I will explain how to replace the battery and the casing of the Ford Mondeo remote control. To perform these simple operations, you will need …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos