Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery of the Ford Mondeo

Model: Ford Mondeo / Fusion MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Key

See other generations:
Video tutorial

Today, I will explain how to replace the battery and the casing of the Ford Mondeo remote control. To perform these simple operations, you will need a flathead screwdriver, pliers, and a star screwdriver.

Insert the flathead screwdriver into the side groove to open the back of the remote and remove the battery. Unscrew the screw located behind the battery using the star screwdriver.

Insert the pliers between the remote's groove to split it into two parts and remove the microchip inside. Place the microchip inside a new casing and close the remote.

Screw the screw back in and insert the battery. Close the back of the remote and test its functionality.


Posted on 6 February 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery on a Ford Mondeo?
How to Replace the Remote Battery on a Ford Mondeo?
Ford Mondeo / Fusion (2014-2021 / MK 4) To replace the battery in the remote for a Ford Mondeo, slide the key out from the top of the device to leverage it open. Once this is done, open the…
How to replace the battery of the 2016 Ford Mondeo remote control
How to replace the battery of the 2016 Ford Mondeo remote control
Ford Mondeo / Fusion (2014-2021 / MK 4) Today we will explain how to replace the battery of the remote control of a 2016 Ford Amodeo car model mk4. To replace the battery, we need to use a …
How to Replace the Key Fob Battery on the Ford Mondeo MK4
How to Replace the Key Fob Battery on the Ford Mondeo MK4
Ford Mondeo / Fusion (2014-2021 / MK 4) In this tutorial, you will learn how to dismantle and replace the battery of the key fob on the Ford Mondeo fourth generation in simple steps. First,…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos