Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

TPMS reset on a Ford Focus

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

In today's video, we can see how to reset the TPMS, which is the tire pressure reset, on a Ford Focus, third generation model produced from 2011 to 2018. We start by turning on the car's ignition and then opening the menu on the information display of the speedometer, here we select the "settings" option and then the "drive assist" option, then click on "tire monitor" and finally press and hold the "OK" button as shown in the video until the reset is complete.

Before performing this operation, it is necessary to check the correct pressure of each tire as indicated by the manufacturer.


Posted on 28 August 2025 by ScegliAuto


Related tutorials

Resetting the Tyre Pressure Monitoring System (TPMS) Light on a Ford Focus
Resetting the Tyre Pressure Monitoring System (TPMS) Light on a Ford Focus
Ford Focus (2011-2018 / MK 3) Below are the steps to reset the tyre pressure monitoring system (TPMS) light on a Ford Focus; before resetting the TPMS sensors, ensure all four tyr…
How to Reset the Tyre Pressure Warning Light on a Ford Focus
How to Reset the Tyre Pressure Warning Light on a Ford Focus
Ford Focus (2011-2018 / MK 3) Learn the steps and instructions to reset the tyre pressure warning light on a Ford Focus; before recalibrating the TPMS sensors, ensure all four tyr…
How to reset the TPMS light on a 2016 Ford Focus
How to reset the TPMS light on a 2016 Ford Focus
Ford Focus (2011-2018 / MK 3) Today, we will see how to register the new tyre pressures on a 2016 Ford Focus vehicle. Get in the vehicle and, keeping the driver's door open, turn …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos