Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure light in the Ford Focus?

Model: Ford Focus MK 3 - Years 2011-2018
Part:

In this tutorial we can see how to reset the tire pressure warning light in the Ford Focus, an extremely simple and quick operation, to be carried out only once the correct pressure of each tire has been restored following the instructions in the manual. First of all, let's go inside the car, then insert the key and turn on the dashboard. Next, reach the general menu using the appropriate button on the steering wheel, enter "Settings", "Driver assist", "Tyre monitor", and hold down the "OK" button to perform the reset. At this point, all that remains is to restart the vehicle and verify that the operation was successful.

Posted on 11 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light on a Ford Focus?
How to Reset the Tyre Pressure Light on a Ford Focus?
Ford Focus (2018-2025 / MK 4) You can completely clear the tyre pressure light on a Ford Focus by inflating the tyres until they reach the optimal pressure value: this will be ind…
How to Reset the Tyre Pressure Warning Light on a Ford Focus mk3
How to Reset the Tyre Pressure Warning Light on a Ford Focus mk3
Ford Focus (2011-2018 / MK 3) This guide shows how to reset the tyre pressure warning light on a Ford Focus mk3. No tools or specialist knowledge are required for this operation. …
How to reset the tire pressure sensor on the Ford Focus
Ford Focus (2011-2018 / MK 3) Today we will discover the procedure that will allow us to reset the tire pressure warning light of the Ford Focus; before performing the reset, it i…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos