Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil light on a Ford Fiesta

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years 2017-2023
Part: Service warning light

The video in question shows how to reset the maintenance light on a Ford Fiesta car. Get into the car, insert the key into the slot and turn it to the ON position, then turn off the engine and turn on the dashboard. Press and hold down both the brake pedal and the accelerator pedal at the same time; keep the pressure on both pedals for at least fifteen/twenty seconds. At this point, you will see the message "service: oil reset in progress" on the display, followed by "oil reset complete", then release the pedals and turn off the dashboard. Turn on the dashboard again to verify that the light has disappeared.

Posted on 18 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light on the Ford Fiesta
How to reset the oil light on the Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) When the oil light comes on in a Ford Fiesta, it means that it is necessary to replace the vehicle's motor oil and only then reset the light. To rese…
How to Reset the Oil Light on a Ford Fiesta
How to Reset the Oil Light on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) If you have just changed the engine oil in your Ford Fiesta but still notice the oil warning light is on, you must perform a manual reset. The requir…
How to reset the oil light on a Ford Fiesta
How to reset the oil light on a Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) .. In this video, you will learn how to reset the oil light on a Ford Fiesta. To start, turn the key to switch on the ignition; this will.. …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos