Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the automatic window opening in the Ford Fusion?

Model: Ford Fusion North America MK 2 - Years 2013-2020
Part: Side window

In this tutorial we can see how to reset the automatic window opening in the Ford Fusion, an extremely simple and quick operation, to be carried out for example after disconnecting the battery. First of all, let's go inside the car, then insert the key and turn on the instrument panel. Starting with the window closed, open it completely, hold down the corresponding button for three seconds, close it and hold the button down again for another three seconds. At this point, all that remains is to verify that the procedure was successful and, if necessary, repeat it for the opposite side.

Posted on 18 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Unlock the Automatic Transmission in a Ford Fusion?
How to Unlock the Automatic Transmission in a Ford Fusion?
Ford Fusion North America (2013-2020 / MK 2) In this tutorial, you will see how to unlock the automatic transmission in a Ford Fusion, an emergency operation to perform if the battery is dead an…
How to Adjust the Headlights on a Ford Fusion?
How to Adjust the Headlights on a Ford Fusion?
Ford Fusion North America (2013-2020 / MK 2) In this tutorial, you will see how to adjust the headlights on a Ford Fusion, a very simple and quick operation. First, position the vehicle in front…
How do you set the clock on the Ford Fusion?
How do you set the clock on the Ford Fusion?
Ford Fusion North America (2006-2012 / MK 1) To adjust the clock of the Ford Fusion, you need to turn on the instrument panel by inserting the key into the ignition switch: once this is turned o…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos