Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open a Stuck Fuel Door on a Ford Fusion?

Model: Ford Fusion North America MK 2 - Years 2013-2020
Part: Fuel cap

On the Ford Fusion, the fuel door may become stuck, possibly due to a malfunction of the release button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the trunk. Then, locate the green cord on the left wall of the compartment, grab it, and pull it forcefully towards you. The fuel door will now be unlocked, allowing you to refuel and repair the faulty component.

Updated on 18 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Fuel Door When It's Stuck on a Ford Fusion?
How to Open the Fuel Door When It's Stuck on a Ford Fusion?
Ford Fusion North America (2013-2020 / MK 2) On a Ford Fusion, the fuel door may get stuck due to a problem with the release button or the lock actuator. In these cases, you can perform an emerg…
How to remove the fuel door on the Ford Fusion?
How to remove the fuel door on the Ford Fusion?
Ford Fusion North America (2013-2020 / MK 2) In this tutorial, you will see how to remove the fuel door on the Ford Fusion, a very simple and quick operation. To do this, you will only need a fl…
How to Replace the Fuel Pump of the Ford Fusion
How to Replace the Fuel Pump of the Ford Fusion
Ford Fusion North America (2013-2020 / MK 2) Today's guide will show you how to remove and replace the fuel pump of the Ford Fusion, as well as the Mondeo. To access the fuel pump, it will be ne…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos