Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Ford Fusion Key Fob?

Model: Ford Fusion North America MK 2 - Years 2013-2020
Part: Key

In this tutorial, you will see how to open the Ford Fusion key fob, a very simple and quick operation, for example, when you need to replace the battery. First, extend the emergency metal key by pressing the designated button. Then, insert a flathead screwdriver into the indicated slot, pry it open, and separate the two halves of the key fob. Next, remove the old battery, insert a replacement of type CR2032 while respecting the polarity, and reassemble everything by following the reverse procedure.

Updated on 4 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Ford Fusion 2 remote control
How to replace the battery of the Ford Fusion 2 remote control
Ford Fusion North America (2013-2020 / MK 2) When the remote control of your second edition Ford Fusion suddenly stops working, don't worry because in most cases the problem is caused by a dead …
Where to Find the Fuse Box on a 2006 Ford Fusion
Where to Find the Fuse Box on a 2006 Ford Fusion
Ford Fusion North America (2006-2012 / MK 1) If you own a 2006 Ford Fusion and want to know where all the various fuses are located, just read this guide carefully and follow the described steps…
How to Open the Fuel Door When It's Stuck on a Ford Fusion?
How to Open the Fuel Door When It's Stuck on a Ford Fusion?
Ford Fusion North America (2013-2020 / MK 2) On a Ford Fusion, the fuel door may get stuck due to a problem with the release button or the lock actuator. In these cases, you can perform an emerg…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos