Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the hood of the Ford KA.

Model: Ford Ka MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Checks and maintenance

See other generations:
Video tutorial

Today we will see the instructions that will allow us to open the hood of the Ford KA in simple steps. First, let's open the driver's side front door and start pulling the hood release lever located at the bottom, next to the pedals; then, let's move to the front of the vehicle and unhook the locking mechanism located in the center, between the bumper and the hood, as shown in the video.

At this point, let's lift the hood and secure it with the prop rod, gently lowering the hood to close it again.


Posted on 10 December 2025 by ScegliAuto


Related tutorials

How to Open the Bonnet of a Ford Ka
How to Open the Bonnet of a Ford Ka
Ford Ka (2008-2016 / MK 2) Opening the bonnet of any vehicle follows simple and quick steps that can be done independently, useful if you need to access components inside, such…
How to Open the Bonnet in a Ford KA?
Ford Ka (1996-2008 / MK 1) In this tutorial, you will see how to open the bonnet in a Ford KA, a very simple and quick operation. First, open the driver's side door, then locat…
How to Open the Bonnet of the Ford Ka?
How to Open the Bonnet of the Ford Ka?
Ford Ka (2008-2016 / MK 2) To open the bonnet of the Ford Ka, pull the red lever located inside the cabin: its position varies depending on the vehicle's steering. For left-han…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos