Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front brake disc of the Ford Transit Custom.

Model: Ford Transit Custom - Years 2012-2024
Part: Brake rotors

In this guide, we will go through the instructions that will allow us to disassemble and replace the front brake disc and pads of the Ford Transit Custom. First, we lift the vehicle and begin to disassemble and remove the front wheel; then we unscrew the bolts of the brake caliper, removing it from the disc, as shown in the video. At this point, we unscrew the bolts of the brake disc to remove it as well, replacing it with the new original one; consequently, we also replace the brake pads, giving the caliper a clean from any residual dirt before reassembling everything!

Posted on 5 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front headlight bulb of the Ford Transit Custom
Replacement of the front headlight bulb of the Ford Transit Custom
Ford Transit (2012-2024 / Custom) Today we will discover information about disassembling and replacing the headlight bulb of the Ford Transit Custom. First, open the hood of the vehic…
Replacement of the rear brake pads and discs of the Ford Transit Custom
Replacement of the rear brake pads and discs of the Ford Transit Custom
Ford Transit (2012-2024 / Custom) Today we will see the instructions that will allow us to disassemble and replace the brake pads and discs of the rear brakes of the Ford Transit Cust…
How to Adjust the Handbrake Cable on the Ford Transit Custom
How to Adjust the Handbrake Cable on the Ford Transit Custom
Ford Transit (2012-2024 / Custom) This guide provides instructions for adjusting the handbrake cable on the Ford Transit Custom. First, raise the vehicle and locate the handbrake cabl…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos